Error D:\ is not accessible the request could not be performed because ò an i/o device error

Description: Error D:\ is not accessible the request could not be performed because ò an i/o device error ,I turn on the software is notresponding, then you turn on the file to see the drive C and drive E is also But D drive can not enter, click on the notresponding, I also do not see the bar always just see the drive and the words only

Error D:\ is not accessible the request could not be performed because ò an i/o device error ,I turn on the software is notresponding, then you turn on the file to see the drive C and drive E is also
But D drive can not enter, click on the notresponding, I also do not see the bar always just see the drive and the words only
the first. you use Win? You go to safe mode to see if the D drive or open winPEPE, if open, then move the data to another drive then drive D to fix

If the drive can't be read, it has one of three problems:

The electronics on the drive went bad. The board can be replaced (by a repair shop specializing in drives, not by you).

The drive is corrupt. There's no readable data on it, but if you format it you'll be able to use it.

The drive itself is shot. You have an interesting paper weight. If you have more money than is good for you, a lab may be able to recover your data. May be able to. (Since anything important should be backed up, all you really have to do is replace the drive and restore from your backup.)

(If it's a WD drive expect the worst. If it's a Seagate drive, call them. They may be able to help you.)